What is Hondabond HT used for?

What is Hondabond HT used for?

Registered. hondabond is a high temp extreme conditions gasket sealent used on honda trannys,oil pumps,water pumps,oil pans. It was developed for use in Honda’s Racing Teams. Pretty much anything without a gasket except for the oil pan and water pump its just good insurance.

What is equivalent to hondabond?

Premium Member. Hondabond = Permatex Ultra Grey RTV Gasket Maker. They are the exact same thing, both made by Permatex. Honda rebrands it and marks it up 100%.

What color is hondabond?

Hondabond HT Silicone Gasket P/N 08718-0004 – Adhesive sealer for metal-to-metal, metal-to-plastic, or plastic-to-plastic bonding. Good for high temperature applications. (This replaced P/N 08718-0001). Ultra Flange Sealant P/N 08718-0003 – Gray Material used to seal areas as described in service manuals.

Is hondabond fuel resistant?

Hondabond 4 – Semidrying liquid gasket. Seals irregular surfaces with a tough, elastic film. Solvent-based for easy removal; also resists gasoline.

Who makes Yamabond 4?

‎Yamaha
Technical Details

Manufacturer ‎Yamaha
Brand ‎YAMAHA
Item Weight ‎5.6 ounces
Product Dimensions ‎17 x 8 x 9 inches
Item model number ‎13

Is Hondabond RTV?

Yes, Hondabond is a bit more adhesive than standard RTV. They designed it for motorcycle engine case halfs. You want a stronger adhesive that is still flexible and able to deal with temperature variations.

How long does Hondabond 4 take to dry?

Registered. Allow it to cure for at least 1hour before starting the car.

How long does Hondabond take to cure?

Is gasket maker gas resistant?

With an operating temperature range of -60° to 500°F (-50° to 260°C), this compound resists common engine fluids, including oil, gasoline, ethanol, water and anti-freeze and prevents contamination from moisture and dust.

How do you use Yamabond?

How to properly use Yamabond

  1. Make sure all surfaces are flat and clean (use acetone or alcohol to clean surfaces)
  2. Apply a conservative amount of sealer on both surfaces (thin amount)
  3. Wait approx 1 minute to allow both surfaces to become “tacky”
  4. Join both surfaces together using hardware to secure.

How long does Yamabond 4 take to dry?

Yamabond 4 Motorsports is a silicone based liquid gasket that fills gaps on a flange surface and prevents leaks. When cured, this product forms a rubber-like body that resists heat and seals joints subjected to high temperature. Gear and engine oil resistant, Yamabond 4 Motorsports sets in 60 minutes.

Which Yamabond for cases?

It would appear that Yamabond #4 is a clear favorite among many of you for sealing the case halves. This is the NON-HARDENING sealer.

Can you use HT on a hondabond 4?

The shop manual simply states “Sealant” and goes no further. The ‘net seems to be split, just like my crankcase. The HT version is supposed to survive in over 300 degree temps – and most crankcases won’t get to that temp. However, other accounts state to use the HT to bond the crankcase halves together anyway.

Are there two types of hondabond 4s?

Oh no… there are two types – Hondabond 4 and Hondabond HT (Hi Temp). That’s just great… So, I do my research. The shop manual simply states “Sealant” and goes no further. The ‘net seems to be split, just like my crankcase.

Can a hondabond 4 be used with a crankcase?

The ‘net seems to be split, just like my crankcase. The HT version is supposed to survive in over 300 degree temps – and most crankcases won’t get to that temp. However, other accounts state to use the HT to bond the crankcase halves together anyway. Some say the Hondabond 4 works fine for joining the cases.

How much does a hondabond 4 cost on Amazon?

All you gotta do is do what you gotta do. I’d love to, but the only one on amazon is 3.5oz for $12, and $20 for shipping that takes god knows how long. When it comes to hobby stuff, Canada might as well be a third world country.

What is Hondabond HT used for? Registered. hondabond is a high temp extreme conditions gasket sealent used on honda trannys,oil pumps,water pumps,oil pans. It was developed for use in Honda’s Racing Teams. Pretty much anything without a gasket except for the oil pan and water pump its just good insurance. What is equivalent to hondabond?…