What is FME antenna?
What is FME antenna?
FME antennas are radio antennas that are terminated with an FME connector for connection to antenna cables and other radio frequency equipment. FME stands for “For Mobile Equipment”and denotes this radio frequency connector type as being primarily for vehicles and other mobile applications.
What are RF connectors used for?
RF (radio frequency) connectors are connectors that are designed to work at radio frequencies for signal transmission of products like radios, antennas, coaxial cables, etc.
What is an FME female connector?
The FME female is designed to be low diameter to allow cables it has been installed on to be snaked through the often tight access holes or spaces of a vehicle to the desired equipment location(s) where an FME male adapter to the required equipment connector series is fitted to the female cable connector. …
What are the different types of antenna connectors?
The most common connector types are these:
- Type N.
- UHF (PL259)
- TNC.
- Reverse Polarity TNC (RPTNC)
- BNC.
- SMA.
- Reverse Polarity SMA (RPSMA)
What is a TS9 connector?
TS-9 (or TS9) is an uncommon RF coaxial connector found in cellular devices such as 3G and 4G mobile broadband modems to support connection of an external antenna. The connector is most popularly found on wireless broadband devices manufactured by Netgear and Sierra Wireless.
What kind of connector is a FME connector?
FME connector. FME (For Mobile Equipment) is a miniature 50Ω RF connector series offering excellent performance from DC to 200 MHz (Note: 2.4GHz for Amphenol 81-169) used primarily with RG-58 or equivalent coaxial cables employed in mobile applications and installations. The FME female is designed to be low diameter to allow cables it has been…
How big is the thread on a FME cable?
The thread is 8mm*0.75mm pitch, and the centre pin is 1.14-1.22mm diameter, with radiused end. There is an extensive array of FME inter-series adapters available and a male cable connector is also offered for both RG-58 and RG-174 type cables to facilitate extensions, splices or transitions.
What kind of RF cable do I need for FME?
FME (For Mobile Equipment) is a miniature 50Ω RF connector series offering excellent performance from DC to 200 MHz (Note: 2.4GHz for Amphenol 81-169) used primarily with RG-58 or equivalent coaxial cables employed in mobile applications and installations. The FME female is designed to be low diameter to allow cables it has been…
What is FME antenna? FME antennas are radio antennas that are terminated with an FME connector for connection to antenna cables and other radio frequency equipment. FME stands for “For Mobile Equipment”and denotes this radio frequency connector type as being primarily for vehicles and other mobile applications. What are RF connectors used for? RF (radio…