What is a flat curtain rod called?
What is a flat curtain rod called?
The type of curtain rod for a stationary valance that has a wide rod pocket is referred to as continental. The classification of continental rods describes drapery rods that have a wide flat face. At times they’re referred to as continental valance rods.
What is a sash rod?
Sash rods are slender curtain rods that are used in pairs, one at the top and one at the bottom with the curtain fabric taut between them. Sash rods are secured to the door so the curtains move with the door when it is opened or closed.
What rods do you use for French doors?
Choose cafe rods for each of the two French doors: one for the top, and one for the bottom of each window. The length of the rods should be the window’s width in inches plus another 2 to 3 inches.
How do swing arm curtain rods work?
A swing arm curtain rod is a rod that is attached to the wall on one side only. The hardware used to mount it consists of a specialized bracket with a hinge that allows the rod to swing 180 degrees to the left or right, depending on which side of the window you install it on.
What is rod pocket curtains?
The most classic and common of all methods of hanging curtains, a rod pocket is a sewn-in pocket, or casing, at the top of a curtain panel that easily slips over a rod and conceals it. Valances hung above the curtain hide the rod even when the curtain is open. Sheers can be mounted under the main panels.
Where do you hang a curtain rod on a French door?
To hang curtains on your French doors without drilling holes, you can use a Kwik-Hang bracket or a magnetic rod. Place the brackets or ends of the rod at the top corners of the window frame on your door and bump them into place carefully with a hammer or a small rubber mallet. It’s that easy!
What size curtain rod do I need for French doors?
Your French door rods should be just about as wide, or just slightly wider, than the width of the window opening. Rod-pocket French door curtains should measure double the width of the glass for a rich, shirred look–three times fullness for sheers.
Can a flat sash rod be mounted outside a window?
Adjustable flat sash rods are easy to install and are great for a shirred lace, sheer or lightweight curtain installed close to glass on windows or doors. Can be mounted inside or outside of a window frame. Bracket has a 1/2″ projection.
What kind of sash rods do I Need?
Flat Sash Rod pairs by Kirsch are great for controlling door panels with rod pockets on both top and bottom. 1/4″ clearance. Durable steel with white enamel finish. Fits sidelights and windows 8″ to 12″ wide. Package contains two rods and appropriate brackets and screws for easy installation.
How big are sash rods for window curtains?
Open one package and find everything you need to hang window curtains. The Sash rod pair is offered in three sizes, including 8 to 12″, 12 to 18″, and 18 to 28″, fitting sidelight window panels and windows from 8″ to 28″ wide. Package contains two rods and appropriate brackets and screws for easy installation.
How do you hang a sash on a window?
The key to hanging a sash is to hide the rod and accent the gather. The rods are installed flush to the inside molding of the window or door at the top and bottom, while the ends of the sash, which is longer and wider than the opening, cover the rods and hold the curtain. Make a small mark 1/2 inch from each side of the corners of the window.
What is a flat curtain rod called? The type of curtain rod for a stationary valance that has a wide rod pocket is referred to as continental. The classification of continental rods describes drapery rods that have a wide flat face. At times they’re referred to as continental valance rods. What is a sash rod?…