What does 7/8 mean on a ruler?

What does 7/8 mean on a ruler?

Fraction, Decimal, and Millimeter Equivalent Measurements

Fraction Decimal Millimeters
13⁄16“ 0.8125 20.6375
7⁄8“ 0.875 22.225
15⁄16“ 0.9375 23.8125
1″ 1 25.4

Where is the 7 8 inch mark on a ruler?

The next smallest marks on a ruler are 1/4ths. The next smallest marks on a ruler are 1/8ths. The red marks on these rulers are at 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, and 1. The next smallest mark, if there are any, are 1/16ths.

What is 3/8 in on a ruler?

The very first line on the left hand side of the ruler is the 1/16 of an inch mark. Between 0 and 1 inch, there are marks that denote 1/16, 2/16 (or 1/8), 3/16, 4/16 (or 1/4), 5/16, 6/16 (or 3/8), 7/16, 8/16 (or 1/2), 9/16, 10/16 (or 5/8), 11/16, 12/16 (3/4), 13/16, 14/16 (or 7/8), 15/16, 16/16 (or 1) of an inch.

What is 7/8 on a measuring tape?

Inch Fraction Decimal and Millimeter Equivalents

Fraction Decimal Millimeters
3⁄4” 0.75 19.05
13⁄16” 0.8125 20.6375
7⁄8” 0.875 22.225
15⁄16” 0.9375 23.8125

How long is an inch on your finger?

The length between your thumb tip and the top knuckle of your thumb is roughly one inch.

What is 3/8 of an inch as a decimal?

0.375
Answer: 3/8 inch to decimal is 0.375.

What is half of 6 7 8 on a tape measure?

The marking is half way between 3/4 (6/8) and 7/8. Therefore, the marking is half of 1/8, or 1/16. Half of 7/8 in inches us the same as half of 7/8 in anything. You simply do the math of 7/8 ÷ 2 or 7/8 × 1/2 = 7/16.

What is half of 3/8 in fraction?

3/16
Answer: Half of 3/8 is 3/16.

How can I get 1/3 cup?

Measurement Equivalents and Abbreviations

  1. 3 teaspoons = 1 tablespoon.
  2. 4 tablespoons = 1/4 cup.
  3. 5 tablespoons + 1 teaspoon = 1/3 cup.
  4. 8 tablespoons = 1/2 cup.
  5. 1 cup = 1/2 pint.
  6. 2 cups = 1 pint.
  7. 4 cups (2 pints) = 1 quart.
  8. 4 quarts = 1 gallon.

What is an inch long?

The inch (symbol: in or ″) is a unit of length in the British imperial and the United States customary systems of measurement. It is equal to 136 yard or 112 of a foot.

How do you read cm on a ruler?

Examine the metric side of the ruler (on the opposite edge). The metric side of the ruler has centimeter numbers from 1 on the far left up to 30 on the far right. The final metric point on the ruler is 30.5, making the ruler 30.5 cm long. The longest lines at each centimeter number indicate the centimeters along the edge of the ruler.

How do you read inches on a ruler?

Look carefully at the English side of the ruler. A ruler is 12 inches long, with inch lines along the edge of the ruler (1 is at the far left and 12 is at the far right, with every number in between in numerical order). The lines at the inch numbers are the longest lines along the edge of the ruler.

Where is mm on a ruler?

Between each centimeter (cm) mark, there should be 10 smaller marks called millimeters (mm). Make sure you read the ruler from left to right. If you are measuring an object, align it with the left side of the zero mark on the ruler. The left side of the line where the object ends will be its measurement in centimeters.

How is a standard ruler divided up name?

How a standard ruler is divided up Name: Period: The standard ruler is broken up into even sections. The inch in broken up into halves, quarters, eighths, and sixteenths. You can tell what division each is by the length of the line. The smaller the division, the smaller the line is. The following figures show this break down..

What does 7/8 mean on a ruler? Fraction, Decimal, and Millimeter Equivalent Measurements Fraction Decimal Millimeters 13⁄16“ 0.8125 20.6375 7⁄8“ 0.875 22.225 15⁄16“ 0.9375 23.8125 1″ 1 25.4 Where is the 7 8 inch mark on a ruler? The next smallest marks on a ruler are 1/4ths. The next smallest marks on a ruler are…