Is 1866 MHz RAM good?

A DDR3 1866 Mhz RAM operates at an 1866 MHz clock, and an 1866 MHz clock cycle takes only 0.525ns to perform, meaning it is just slightly faster than 1600, and it handles most tasks with ease, including gaming. Overall, yes DDR3 1866 memory is enough for gaming.

Is 2400 MHz RAM bad?

RAM frequency is measured in MHz and usually immediately follows the DDR version in the RAM spec. For example, 8GB DDR4-2400 RAM is running at a frequency of 2400MHz. This is why though higher frequency RAM is technically faster, that additional speed often does not translate into better actual real world performance.

What is the difference between DDR3/1600 and 1866?

If you are comparing DDR3-1600 CL9 with DDR3-1866 CL10 then there is no real difference. You will need 1866 modules with latency the same, or lower, than the 1600 modules you want to compare to in order to say it is “faster”. Keep voltage in mind also. At 1600 or 1866 frequencies you don’t see many that are above 1.5v.

Is 2400MHz of RAM good?

The only caveat to that is if, instead of having a graphics card, your PC uses the integrated GPU, which will always see a significant drop in performance when using 2400MHz or even 3000MHz RAM. …

Is CL9 better than CL10?

Illustrious. Technically, CL9 is going to be ever so slightly faster than CL10 if the kits are identical in all other specifications, but it’s really a pretty much insignificant difference in real life. The number after CL is CAS latency as measured in cycles.

Is 1866mhz better than 1600mhz?

but bigger is almost always better. Yes, but just to clarify, sometimes low end 1866 MHz memory runs at slower timings to reach the 1866MHz speed. This would effectively be slower for daily use than 1600MHz RAM that had tighter (more respsonsive) timings.

Is 3000 Hz RAM good?

Final Thoughts. In summary, while a RAM chip with a high frequency is certainly preferable to one with a low frequency, both 3000mhz and 3200mhz are relatively high frequencies. This means that either RAM chip will guarantee a high level of performance for your PC.

Which is better DDR3 2400 or 1866 Ram?

When you combine the best latency with the best speed, DDR3 2400 comes out on top. You can end up with 9.1 nanoseconds of latency, which is the best out of all these RAM modules. Performance: 1600 | 1866 | 2400 | 2133 However, once you bring power into the mix, DDR3 2133 wins, as it delivers good speeds at 1.5V.

What’s the difference between DDR3 1600 and 2133?

DDR3 1600: speed 800MHz or 1600MT/s. DDR3 1866: speed 933⅓ MHz or 1866⅔MT/s. DDR3 2133: speed 1066⅔MHz or 2133⅓MT/s . DDR3 2400: speed 1200MHz or 2400MT/s. All DDR3 chips are named after the speed they give you. The first number, in megahertz, is the clock speed.

Which is the fastest DDR3 RAM in the world?

DDR3 2133 is the fastest RAM in the list that still runs at 1.5V. As we’ve already mentioned, this is important for power usage but also looking after your equipment. Although the latency numbers jump up a little with this chip, the theoretical bandwidth and speed make up for that, so expect to see a better performance.

Which is the first number in DDR3 RAM?

All DDR3 chips are named after the speed they give you. The first number, in megahertz, is the clock speed. As these are all double data rate types of RAM, you get two times the amount of data, which gives you the second number 1600MT/s. This rate is the number of mega transfers per second.

Is 1866 MHz RAM good? A DDR3 1866 Mhz RAM operates at an 1866 MHz clock, and an 1866 MHz clock cycle takes only 0.525ns to perform, meaning it is just slightly faster than 1600, and it handles most tasks with ease, including gaming. Overall, yes DDR3 1866 memory is enough for gaming. Is 2400…