How to do a complete disassembly of a 1911?

Complete Disassembly If you want to take your 1911 completely to pieces, there are several further steps: Take out the firing pin and firing pin spring from the firing pin channel. Using your punch, start the taking the extractor out.

How to disassemble a Kimber pro carry 1911?

If you need to know how to disassemble your 1911, see my tutorial: How to disassemble a Kimber Pro Carry 1911. 1911 reassembly video is at the end of this article. 1911 Reassembly Instructions. Putting a 1911 Back together. This article will show you step-by-step how to reassemble a 1911.

Where is the firing pin on a 1911?

Use your finger or a punch (or old 1911 firing pin, if you have one) to press the firing pin at the back of the slide. Keeping the firing pin depressed, slide the firing pin stop down. Use caution here; once you have the firing pin stop out of the way, the firing pin will move toward the rear of the slide quickly.

What’s the best tool to clean a 1911?

Luckily, there are such tools specially designed for the 1911, like the Real Avid Smart Wrench. A barrel brush, to clean inside the barrel. These are generally interchangeable between handguns, but if you haven’t got one I would recommend the Sage and Braker Mercantile cleaning brush, which I’ve found to be extremely long-lasting.

https://www.youtube.com/watch?v=eTH53kUSUiI

Where can I find the 1911 owner’s manual?

Read the instructions and warnings in this manual CAREFULLY BEFORE using this firearm. 2100 Roosevelt Avenue • Springfield, MA 01104 1-800-331-0852 • Fax: 413-747-3317 www.smith-wesson.com Owner’s Manual 1911 Series READ THESE INSTRUCTIONS AND WARNINGS CAREFULLY. BE SURE YOU UNDERSTAND THESE INSTRUCTIONS AND WARNINGS BEFORE USING THIS FIREARM.

Do you need owner’s manual for Thompson & Auto Ordnance 1911?

BE USED FOR THOMPSON & AUTO-ORDNANCE 1911 MODELS As the owner of a firearm, you must undertake the full-time responsibility of safe firearm handling for your own safety and the safety of those around you. Before handling any firearm read and understand the information contained in its owner’s manual.

How do you disassembly a Glock slide?

Slide Disassembly Remove the firing pin safety and firing pin safety spring from the slide. This is also a step where you can replace the firing pin safety spring in the firing pin safety. Insert the spring in to the bottom area of the firing pin safety push and twist (counter clockwise) until it is seated. IMPORTANT:

How do you take a Glock pistol out of the frame?

Gently pry the locking block out of the frame. These can be very tight in a new gun. Push out the trigger housing pin. Gently lift the trigger housing by pulling up underneath the ejector. Grab the trigger housing on both sides and simply pull the trigger assembly out of the frame.

How to do a complete disassembly of a 1911? Complete Disassembly If you want to take your 1911 completely to pieces, there are several further steps: Take out the firing pin and firing pin spring from the firing pin channel. Using your punch, start the taking the extractor out. How to disassemble a Kimber pro…