How do you reset the SRS light on a Mercedes?

How do you reset the SRS light on a Mercedes?

Unfortunately, the SRS Airbag light doesn’t reset on its own. Even if the problem has been addressed, you will need an Airbag scanner to reset the light. Very often the light goes on because of a dying battery. But once the light is on, it will stay on even when you install a new battery, until you manually reset it.

What is SRS malfunction on Mercedes?

SRS stands for Supplemental Restraint System. If this warning light stays on in your Mercedes Benz, that means that there is a problem with the airbags or the components that are part of the SRS system.

How do I fix my SRS light on my dashboard?

How to Reset an Airbag Light

  1. Put the key into the ignition and turn the switch to the “on” position.
  2. Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
  3. Repeat Steps 1 and 2 two more times.

How much does it cost to reset SRS light?

Number 1 — Reset Airbag Light This process can take several hours of time and usually costs a few hundred dollars, although depending upon the type of car it may be up to about $600.

How do I get the SRS light off?

Turning off the airbag light yourself can save you a trip to your car dealer.

  1. Turn on the ignition switch with your car key.
  2. Wait for the airbag warning light to turn off.
  3. Turn the ignition switch of your car back off for a little longer than three seconds.
  4. Repeat steps 1 through 3 twice to make three times total.

Is there a way to reset the SRS light?

You can’t rest the airbag SRS light with a simple OBD II scanner which gives you the check engine light codes. You will need a more advanced scan tool to reset the airbag light. For around $110-150, which is how much a diagnosis costs anyway, you can get your airbag reset tool.

Can you reset the SRS module on a Mercedes?

MyAirbags is proud to offer Mercedes SRS Airbag Module Reset and Mercedes Seat Belt Pretensioner Repair services to get your Mercedes-Benz back on the road again safely.

How to reset SRS / airbag light on Mercedes Benz?

Reset SRS/ Airbag light. 1. Locate the fuse panel cover and remove it. This is located on the lower left side of the control panel on the driver’s side of the car. Find the port that fits the OBD cable and plug the scan tool’s cable into this port. 2. Put the key into the ignition and turn it to the “Run” position.

What does the SRS light mean on a Mercedes Benz?

What does SRS light mean? SRS stands for Supplemental Restraint System. If this warning light stays on in your Mercedes Benz, that means that there is a problem with the airbags or the components that are part of the SRS system.

How do you reset the SRS light on a Mercedes? Unfortunately, the SRS Airbag light doesn’t reset on its own. Even if the problem has been addressed, you will need an Airbag scanner to reset the light. Very often the light goes on because of a dying battery. But once the light is on, it…