How do I bypass the toner light on a Brother printer?

How do I bypass the toner light on a Brother printer?

1. Power on the Brother printer.
2. Open the toner access door located at the front of the printer.
3. Press the “Clear/Back” button.
4. Scroll through the list of toner cartridges until you have located the one that is giving the “Replace Toner” message.
5. Press the “1” button to reset the toner cartridge display.

How do I reset my brother hl 5350dn toner?

Brother HL5340D HL5370DW Toner Counter Reset – TN3290

1. Open the front cover and leave open while completing the following steps.
2. Turn the printer off.
3. Hold the GO button while turning the printer on.
4. When 3 led light up release the GO button.
5. Press the ‘go’ button twice (3 LED’s should light up again).

How do I reset my low toner?

Take the toner & drum unit out of the machine. Press the Start button….

1. Open the front cover of the printer.
2. Press the Clear / Back button.
3. Press the * button.
4. Press the 0 button.
5. Press the 0 button.
6. Close the front cover.
7. This will clear the ‘Toner Low’ error and allow for continuous printing.

How do you reset the drum on a Brother HL 5340D?

Replace Drum

1. Make sure that the machine is turned on.
2. Open the front cover.
3. To reset the drum counter, press and hold down Go for about 4 seconds until all the LEDs light up. Once all four LEDs are lit, release Go.
4. Close the front cover.
5. Make sure that the Drum LED is now off.

Why does replace toner continue to appear on the LCD after I replaced the toner?

The message Replace Toner appears on the display if any one of the following occurs: – The toner cartridge is at its end of life and needs to be replaced.

How to reset brother hl-2280dw low toner cartridge?

So, if you ever find yourself in this position, try this: Close the front cover, your toner cartridge should now work. Subscribe to comments with RSS or TrackBack to ‘Brother HL-2280DW Low Toner Warning Reset HowTo’.

Why does my Brother printer not reset the toner counter?

Sometimes the toner counter doesn’t reset when you install a Brother TN2345 or TN2315 cartridge in your HLL2380DW printer. Or you may need to print a few more pages urgently after your printer tells you it’s time to replace the toner. You may wish to try the following procedure to put your printer into continue mode:

What to do when toner runs out on printer?

You may wish to try the following procedure to put your printer into continue mode: You should now be able to use your new toner even though it didn’t reset by itself when you installed it. Or you can use the rest of your empty toner, but expect print quality to deteriorate as the toner runs out.

How do I bypass the toner light on a Brother printer? Power on the Brother printer. Open the toner access door located at the front of the printer. Press the “Clear/Back” button. Scroll through the list of toner cartridges until you have located the one that is giving the “Replace Toner” message. Press the “1”…