How do I bypass the color cartridge on my Lexmark printer?

How do I bypass the color cartridge on my Lexmark printer?

  1. Access the “Printer Settings” window.
  2. Select properties for your printer.
  3. Click the “Ports” tab in the Properties window.
  4. Disable bi-directional communication.
  5. Click “Apply” and then click “OK.” This update will disable bi-directional communication with the printer, effectively turning off low ink warnings.

How do I reset my Lexmark smart chip?

Place the smart chip against the pins on the reset device. A red light will flash to show you that the chip is engaged. When the light turns green, usually six or seven seconds later, the cartridge chip is reset and ready to use.

Why does my Lexmark interact S605 keep showing printhead error?

Just in case before replacing that part The next step would be to try a print head cleaning kit like this one: Click HereIt says Brother but the kits are not specific to any one brand every kit comes with the same thing.

What to do if your Lexmark printer says 900?

To solve the issue, turn off the printer and disconnect all cables except the power cord. Turn the printer back on and see if the error still occurs. Also download and update the latest Lexmark firmware. If the 900 error returns, your Lexmark printer may need service.

Why is my Lexmark printer not printing documents?

If your printer is not printing, this problem may have different reasons such as communication failure or print failure. You may receive the error message “Document Failed to Print”, “Communication Not Available”, or no error message at all.

Why is my Lexmark printer saying error 1203?

Lexmark Printer Error: Error 1203 is a well-know Lexmark printer error. If your printer is refusing to print and displays error code 1203, this issue is caused by a problem with the print cartridge. For easy troubleshooting, follow these steps to get rid of Lexmark error 1203:

How do I bypass the color cartridge on my Lexmark printer? Access the “Printer Settings” window. Select properties for your printer. Click the “Ports” tab in the Properties window. Disable bi-directional communication. Click “Apply” and then click “OK.” This update will disable bi-directional communication with the printer, effectively turning off low ink warnings. How do…