Can Hardie soffit get wet?

Luckily, it takes lots of water to saturate Hardie products! It’s no problem for a contractor to install James Hardie products in light rain. And if a board does get wet, but is not sitting in moisture for an extended period of time, you can simply let it dry out before installing.

How thick is fiber cement soffit?

1/4″
Traditional Ventilated Soffit Choose Allura Fiber Cement Ventilated Soffit, available in 1/4″ thickness for porch roofs or overhead space, to control the airflow under eaves and throughout your home or building. All available in 12′ length.

Does soffit need to be vented?

While soffit comes in wood and aluminum, they are most commonly made of vinyl for durability. Soffit can be non-vented or vented to allow for maximum roof ventilation. Non-vented or continuous soffit works best when your roof has narrow eaves or if you need to ventilate a large amount of attic space.

Is Hardie soffit fire rated?

Yes, HardieBacker® 1/4″ Cement Board is deemed noncombustible when tested to ASTM E 136 and can be used in conjunction with other noncombustible materials around a fireplace.

What can I use instead of soffit?

One great alternative to a soffit ventilation system is to install an intake vent right at the lower edge of the roof. They call this a venting drip edge. The venting drip edge seems to be the easiest and most common way to go.

Is James Hardie siding waterproof?

HardieBacker® Cement Board with HydroDefense™ Technology is a long-lasting, waterproof solution for walls, floors, and countertops.

How thick is a soffit board?

Standard Soffit Dimensions for Eaves While not all soffit board sizes are the same, the width of most soffit falls in the range of 16 inches to 24 inches when used to cover the eaves of the home. In addition, standard soffit sizes feature a ¼-inch thickness, too, which can help with installation.

Can Hardie soffit get wet? Luckily, it takes lots of water to saturate Hardie products! It’s no problem for a contractor to install James Hardie products in light rain. And if a board does get wet, but is not sitting in moisture for an extended period of time, you can simply let it dry out…