Why is my Tetra Whisper filter not working?

Why is my Tetra Whisper filter not working?

Sometimes, the magnetic impeller assembly can become clogged with debris. To clean off fish waste, mineral deposits, etc., you will need to take the magnetic impeller assembly out of the filter. Take the rubber end cap pieces off the top and bottom.

How do I fix my Tetra Whisper?

  1. Unplug your Tetra Whisper filter from the outlet and carefully pull it free of the aquarium.
  2. Examine the intake strainer and make sure it is not broken or damaged.
  3. Carefully remove the intake strainer from the intake tube.
  4. Pour the water out of the back of the filter, being careful that no gravel gets into your drain.

What do I need to set up a 20 gallon fish tank?

Fish Tank Supplies:

  1. 20 Gallon Fish Tank (Starter Kit or Empty Tank)
  2. 20 Gallon Stand.
  3. Fish Tank Lid (in Starter Kit)
  4. Day/Night Tank Light (this is the one I have… it has a remote for night time!)
  5. Water Filter (in Starter Kit)
  6. Water Heater (in Starter Kit)
  7. Substrate (Sand, Gravel or None)

When should I change my Tetra Whisper filter?

Insert the cartridge into the filter. Replace every two weeks, or more often if there is reduced water flow.

Why isn’t my filter pumping?

The most likely cause is that the air pipes of the filter are disconnected or blocked or the air pump has broken down (See Q1). Once the pipes are cleared or reconnected or the pump has been repaired or replaced – the filter will work again and the tank will clear.

Why is my Tetra Whisper filter so loud?

This is often a problem with the impeller. Make sure the magnet and the white blades are connected as one piece. Another problem that may occur with the impeller is sand. Tetra Whisper® Power Filters will not run properly in an aquarium containing sand.

Does a 20 gallon tank need air pump?

An air pump is NOT required for this purpose, as long as your tank maintains adequate water movement together with surface agitation. This is generally the case if external (e.g., box or cannister) filters are used. Second, air pumps can be used to force water through a filter (e.g., sponge or corner filter).

How does the Tetra Whisper aquarium filter work?

The Tetra Whisper internal aquarium filter is the ultimate in quiet, convenient 3-stage filtration. The dual-sided mesh of the Bio-Bag® catches debris and fish waste while the activated carbon absorbs odors and discoloration. Biological filtration is provided by the Bio-Scrubber.

How does the Whisper IQ power filter work?

Whisper ® IQ filters use StayClean™ technology for easier maintenance and healthy fish. A sound barrier decouples motor from filter to give you the quiet you’ve always wanted. With better materials and impeller upgrades, these filters are made to last. It’s time for a filter that’s easy to use and easy to clean!

How big of an aquarium do you need for a whisper pump?

Whisper Air Pumps can be used in deep tanks (up to 8 feet deep), and have enough strength to power long decorator air stones, multiple air stones in one or more tanks, and protein skimmers for salt water aquariums. Every Tetra pump comes with a warranty, see product label for details. Whisper Pumps Produce a More Oxygenated Aquarium

Is there a warranty on a TETRA air pump?

Every Tetra pump comes with a warranty, see product label for details. Tetra’s Whisper pumps will keep both you and your underwater friends happy. The pumps provide oxygen, which is good for your fish and tank, and also provide water movement.

Why is my Tetra Whisper filter not working? Sometimes, the magnetic impeller assembly can become clogged with debris. To clean off fish waste, mineral deposits, etc., you will need to take the magnetic impeller assembly out of the filter. Take the rubber end cap pieces off the top and bottom. How do I fix my…