What is the maximum clock speed for ATmega16?

What is the maximum clock speed for ATmega16?

Specifications

Specification Value
Maximum Speed 16 MHz
Device Core AVR
Instruction Set Architecture RISC
Maximum Clock Frequency 16MHz

Why ATmega16 is used?

8-bit microcontroller – ATmega16 is a high-performance microcontroller and it can process 8-bit data at a time. It takes 8 bit of data from memory. And utilize low power consumption. ATmega16 has come up with the most of necessity peripherals like ADC (analog to digital converter), USART, SPI, and an analog comparator.

How many ADC channels are in ATmega16?

ATmega16/32 supports eight ADC channels, which means we can connect eight analog inputs at a time.

How do you program ATmega16?

Below are the steps to burn the code into Atmega ICs using USBASP JTAG and Atmel Studio:

  1. Installing USBASP driver.
  2. Downloading and Setting up Atmel Studio.
  3. Setting up External Toolchain in Atmel Studio e.g. WinAVR.
  4. Setting up Atmega16 with oscillator and one LED.
  5. Building and Uploading Sketch into Atmega16.

What is the size of flash memory in ATmega16?

ATMEGA16 – Simplified Features
CPU 8-bit AVR
Program Memory Type Flash
Program Memory 16Kbytes[10000 write/erase cycles]
CPU Speed 16 MIPS

Which is the best microcontroller?

10 Best Microcontrollers on the Market

  • 1: Groboards Giant Board. (Image credit: Grobaords)
  • 2: Seeeduino XIAO. (Image credit: Seeed Studio)
  • 3: The BBC micro:bit V2. (Image credit: micro:bit)
  • 4: Adafruit Gemma M0. (Image credit: Adafruit Industries)
  • 5: Arduino Uno Rev3. (Image credit: Arduino)

What is the resolution of DAC0808?

IC DAC0808 Parameters

Parameters IC DAC0808
Settling time 0.15 µs
Operating temperature range (C) 0 to 70
Rating Catalog
Resolution 8 Bits

What are the features of ATmega32 ADC?

The ATmega32 provides the following features: 32Kbytes of In-System Programmable Flash Program memory with Read-While-Write capabilities, 1024bytes EEPROM, 2Kbyte SRAM, 32 general purpose I/O lines, 32 general purpose working registers, a JTAG interface for Boundary- scan, On-chip Debugging support and programming.

Which IDE do we use for AVR microcontrollers?

All AVR microcontrollers require Integrated Development Environment(IDE) such as Atmel Studio. Using this IDE, we can create, compile, and debug programs on all AVR microcontrollers. Atmel Studio is available free of charge.

How do I program AVR chip?

Open Atmel Studio and navigate to Tools->Device Programming dialog box. Select the programming tool, device and the programming interface. Read the Device ID to verify the connections between the tool and the device. Select the binary to be programmed (hex/elf/bin format) and the options (Erase/Verify).

How are the pins used in ATMega16 microcontroller?

ATMega16 gives a serial communication method for communication and programming. The UART pins are available in the microcontroller to operate with devices serially. It uses two communication pins and some internal programming to communicate but those pins can also be used for programming by using a third pin known as clock pins.

What kind of oscillator does ATmega16 have?

Oscillator: ATMega16 has internal 8 MHz changeable oscillator but to extend the clock speed an external oscillator will be used at the oscillator pins of the microcontroller which are given below: Digital Input/Output: Input and output is the requirement of each device and micro-controller need these functions to communicate with external devices.

What is the watchdog timer on ATMega16?

ATMEGA16 has also programmable Watchdog Timer with Separate On-chip Oscillator. With this Watchdog timer to reset under error the controller can be used on applications where human interference in minimal. As mentioned earlier ATMEGA16 is similar to any other microcontroller and in particular ATMEGA32.

How to create a hex file on ATMega16?

Under the ‘Programming’ tab, select target device as Atmega16. File format to use as Intel Hex. Under the FLASH option, browse to the folder where you saved your code file. Here, you will notice many file have been generated after compilation. Select the file with the .hex extension.

What is the maximum clock speed for ATmega16? Specifications Specification Value Maximum Speed 16 MHz Device Core AVR Instruction Set Architecture RISC Maximum Clock Frequency 16MHz Why ATmega16 is used? 8-bit microcontroller – ATmega16 is a high-performance microcontroller and it can process 8-bit data at a time. It takes 8 bit of data from memory.…