How do you program a one for all remote?

How do you program a one for all remote?

How to Program your One For All® remote

1. PRESS the button for the device you want to program,(TV,VCR,CABLE,etc.), then RELEASE.
2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
3. ENTER the 3 digit code for your brand.
4. You should receive 2 quick flashes after entering your code.

What is the Setup button on one for all remote?

How does it work? Step 1: First, press down the MAGIC key on your remote. Step 2: Next, select the device you want to control. Step 3: Finally, hold down the digit on the remote for your brand & device (e.g. 6 for Samsung TV).

How do I reset a one for all remote?

All replacement remotes: How do I perform a factory reset on my Replacement Remote?

1. Hold down the GREEN + YELLOW key, until the LED blinks twice.
2. Enter the code 981.
3. The LED blinks now four times and everything is deleted from your remote control.

Why has my one for all remote stopped working?

Remove a battery from the remote and press a button to discharge the remote entirely. Reinsert the battery – the LED should blink twice. Press the digits 2 and 8 simultaneously within 6 seconds – the LED should blink twice. Enter the code 9 8 1, the LED will blink 4 times.

Where can I find the one for all user manual?

On the website of One For All is a support section which is divided into following categories: Universal Remotes, Digital Aerials, TV brackets, Wireless AV Senders, Accessories (Signal Booster, Headphones, Cable.). Under these categories there are listed all the product types and specific models.

What can a one for all remote control do?

Your One For All remote control can learn any function from any other working remote control. This is a quick and easy one-time setup that allows to control any infrared controlled device you have in your living room.

How can I learn to use my OFA remote?

To learn functions, the original remote should be approximately 3cm from the OFA remote, pointing towards it as shown below: . Hold down TV Power and Mute until the red LED blinks twice. . Press and release the key you want to learn a function onto (for example the TV Power key) – The red LED will blink once and go out .

How to learn a function on a remote?

Hold down TV Power and Mute until the red LED blinks twice. . Press and release the key you want to learn a function onto (for example the TV Power key) – The red LED will blink once and go out . Press and release* the corresponding key on the original remote, for example Power. .

How do you program a one for all remote? How to Program your One For All® remote PRESS the button for the device you want to program,(TV,VCR,CABLE,etc.), then RELEASE. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE. ENTER the 3 digit code for your brand. You should receive 2…