How do you program a Baofeng UV-5R for police scanner?

Here’s how you can do it properly.

On the radio, press the [VFO/MR] setting and press Frequency Mode.
Press the [A/B] setting and select the A side.
Press on the [BAND] button to receive a frequency band.
Disable the TDR (Dual Standby/Dual Watch)
Start entering the frequency.
Next, enter in the DCS/CTCSS Code.

Do I need a license to use a Baofeng radio?

Without a license, it is legal to use for receive-only. A license is needed for transmitting. Be careful. Reportedly, that radio is able to also transmit out-of-amateur-bands, for which you will not be licensed, and for which there are penalties.

Do you need a license to use Baofeng UV 5R?

Is the Baofeng UV-5R illegal?

While it’s true many of the Baofengs are wide open on any frequency in the 136–174Mhz and 400–520Mhz range, and it is illegal to import, market and sell these devices, it is not illegal to own or operate these devices if you are a licensed Amateur radio operator and you are operating only on amateur radio frequencies.

How far can a Baofeng reach?

To make contacts hundreds of miles away, you need a high-powered, high frequency (HF) radio and a General license. A BaoFeng handi-talkie using VHF maxes out at about 30 miles under ideal conditions and with a few tricks and tweaks.

Are Baofeng uv5r illegal?

How do I Turn On my Baofeng uv-5r?

How to Turn Your Baofeng UV-5R On To turn on your UV-5R, all you have to do is rotate the knob at the top of the radio beside the antenna. Aside from turning the radio on, this knob will also adjust the volume of incoming messages you receive.

Where is the battery on a Baofeng radio?

The battery bottom is about 1 to 2 centimeters below the bottom of the radio’s body. -Align the battery with the guide rails on the aluminum chassis and slide it upwards until a ‘click’ is heard. -The battery latch at the bottom locks the battery. -Turn off the radio before removing the battery.

How do you turn on a UV 5R radio?

If you want to be able to transmit (and you do), then you need to upgrade your antenna, and you need to get one with a female SMA connector. To turn on your UV-5R, all you have to do is rotate the knob at the top of the radio beside the antenna.

What are the different modes of the uv-5r?

Your UV-5R has two different modes that you can listen to: Channel mode and Frequency mode. You use channel mode to quickly access the frequencies that you have programmed your radio to remember. This makes it much faster to listen in on and transmit on the frequencies that you like to access often.

How do you program a Baofeng UV-5R for police scanner? Here’s how you can do it properly. On the radio, press the [VFO/MR] setting and press Frequency Mode. Press the [A/B] setting and select the A side. Press on the [BAND] button to receive a frequency band. Disable the TDR (Dual Standby/Dual Watch) Start entering…