How do I setup my tp-link router to my computer?

Power on your router and computer first and then modem.

Log into the router’s web-based management page.
Configure WAN Connection Type.
Enter your PPPoE username and password which are provided by your ISP.
Click Save to save your settings, then the router will connect to Internet after a while.

How do I access my tp-link router settings?

Open the web browser and in the address bar type in: http://192.168.1.1 or http://192.168.0.1 or http://tplinklogin.net.Then press Enter. Note: The LAN IP changes by model. Please find it on the bottom label of the product.

How do I change my tp-link router settings?

Step 1 Open the web browser and type the IP address of the device in the address bar (default is 192.168. 1.1). Press Enter. Step 2 Type the username and password in the login page, the default username and password both are admin, Then click OK to log into the device.

How do I setup my tp-link router for the first time?

Network cable (for some models).

1 Connect Power. Please ensure that you are using the power adapter that came with your router.
2 Connect to Modem by Cable/Wire.
3 Log In.
4 Select Password.
5 Change SSID and Password.
6 Keeping Your Password Secure.
7 Deciding to Update.

How do I setup my tp-link router without a computer?

How to set up a Wi-Fi router without a computer

1) Plug in your router, and wait a minute or two for it to completely power up.
2) Using your smartphone/tablet, turn on your Wi-Fi and connect to your router’s network.
3) You will be prompted to provide a password.
4) When connected, open your device’s browser.

Why TP-Link wireless is not working?

1) Check the WLAN LED indicator on your wireless router/modem, and make sure it is on or flashing. Check Wi-Fi On/Off button and make sure Wi-Fi is enabled. 2) Check whether you have disable the SSID broadcast on your router. 3) Make sure your computer/device is still within the range of your router/modem.

Why can’t I log into my TP-Link router?

Or you can refer: What can I do if I forget the login password of TP-Link Wireless Router? Restart the TP-Link device. A simple restart by pushing the power off and on the button will not bring any harm. Usually, there is a reset button/hole on the TP-Link device, push it for a few seconds can factory reset it.

Why can’t I log into my TP-Link Router?

How do I get my tp-link to work?

How To Configure My Range Extender Via WPS Button ?

Connect the Power Adapter of your Range Extender to an Electric Socket.
Press the WPS button located at the back of the Main Router.
Wait until the WPS LED blinks.
Push the WPS button on the TP-Link Extender.
The WPS light takes some time to blink.

How do I access TP Link router?

How to Access TP-Link Router Config Page From A Phone or Tablet. The easiest option to get into admin page of a modern TP-Link wireless router is to use Tether app by TP-Link for Android or iPhone. All you need to do is install and launch the app and then only enter the username and the password.

Why is my TP Link not working?

Generally, people have a steady version fixed on their router. Unfortunately, TP-Link router not working after firmware update problem is arising because of certain errors such as unresponsive wireless network, hanging issues, and other minor problems.

How do I Set my router settings?

Start by setting your router next to your modem and plugging the power supply into the wall socket. Let it completely power up. Then, connect an Ethernet cable from the modem’s Ethernet port to the WAN or Internet port on the router.

How do you set up Linksys wireless router?

Steps to Setup Linksys Wi-Fi Router. To start with the process of setup, you need to connect the Linksys Smart Wi-Fi Router to the power socket. Now, connect one side of the Ethernet cable to the router and leave the other one as it will be connected to the modem that you are using.

How do I setup my tp-link router to my computer? Power on your router and computer first and then modem. Log into the router’s web-based management page. Configure WAN Connection Type. Enter your PPPoE username and password which are provided by your ISP. Click Save to save your settings, then the router will connect to…