Can I make my own vinyl record cleaning solution?

Mix 1/4 of 96-99% isopropyl alcohol, 3/4 distilled water, and one or two drops of rinse agent. The best way to do this is to add these ingredients to a spray bottle and shake well. Place the record on a microfiber cloth. Spray the solution on the record by making sure none of it gets on the label.

What is the best solution to clean vinyl records?

Dampen a clean microfiber cloth with water (distilled water is preferred), and lightly wipe the entire surface of the record in a circular motion with the grooves of the record, being careful to avoid the center label.

How do professionals clean vinyl records?

Steps to Clean Vinyl Records

Remove dust and static with a record brush.
Inspect the record for visible blemishes.
Spray cleaning solution on problem areas.
Wipe clean using circular movements.
Store vinyl records properly to prevent future problems.

Can I use Windex to clean my vinyl records?

You can now proceed to use Windex. Remember, as it’s harsher than just water and soap, so only spray a little on the records. A few sprays will do as you’re going to spread the solution by using your microfiber cloth anyway. Wipe the records gently until the Windex dries up and polishes the records.

What is the cheapest way to clean vinyl records?

Dish soap is the cheapest option, but it will leave a bit of residue on your records. Record cleaning solution is a better choice, but a bottle will generally cost $20 to $30. If there are no fingerprints or other oily smudges on the record, you can get a way using just water, which is actually better for the record.

Is rubbing alcohol bad for vinyl records?

In particular, we recommend avoiding any that contain isopropyl alcohol. While it will clean the muck off your record, many people report that over time it’ll also damage the protective coating on your vinyl. If you are going to use a solution with isopropyl alcohol – use is sparingly.

Can I use dish soap to clean records?

Some collectors recommend cleaning vinyl using just distilled warm water because most products will leave behind a residue. The water should be warm enough to dissolve the soap, but should not be steaming. If you’re using dish soap, make sure it’s a gentle formula, such as Dawn.

What kind of machine can I use to clean my records?

Degritter is a safe and simple to use record cleaning machine that uses ultrasonic technology. It can wash and dry your records in only few minutes.

How does an active record cleaning machine work?

Active means that it removes small particles and dirt from the water during the ultrasonic cleaning process. Dirt washed off the record is filtered out of the ultrasonic cleaning bath and it won’t end up back on the record.

How does the degritter record cleaning system work?

The core of Degritter is the 120kHz ultrasonic cleaning system. It has been carefully designed in house to make sure that records are cleaned thoroughly and without any damage to the surface of the record. Ultrasonic cleaning works by creating a large number of microscopical bubbles in the cleaning bath, a phenomena called cavitation.

What’s the best way to clean a vinyl record?

Many professional disc jockeys say the best way to clean your vinyl records is with just the deionized water and then us a discwasher brush. These brushes may be difficult to locate, so you may have to search online to purchase one.

Can I make my own vinyl record cleaning solution? Mix 1/4 of 96-99% isopropyl alcohol, 3/4 distilled water, and one or two drops of rinse agent. The best way to do this is to add these ingredients to a spray bottle and shake well. Place the record on a microfiber cloth. Spray the solution on…